#Cnc usb controller license file how to
#Cnc usb controller license file install
#Cnc usb controller license file serial

With the baud rate set up correctly, we will next need to find the correct port for connecting your CNC. This is a constant, but varies depending on the model of CNC that you have:ģ018 PRO: The Baud Rate should usually be set to 115200 but some models use 57600.ģ018 PROVer: The Baud Rate will always be 115200 for this model.Ĥ030 PROVerXL: The Baud Rate will always be 115200 for this model. Simply select the Service/Settings option from the top menu and you should see the settings menu: If this is the case, then Candle was unable to automatically find your router and you must manually configure it. More often than not, 'Not Connected' is what you should see when you open Candle for the first time. See the instructions below for the status that you see upon first loading up Candle: With Candle loaded up you will want to check the status in your device window, this will help you understand if you have an active connection. Your CNC can only connect to one controller at a time. Note: Before you get started, disconnect any offline controllers. You can now use the shortcut from your desktop to start up Candle. We do not suggest running Candle off of a USB or removable drive as this causes errors.Īfter you have placed the folder where you want it to be stored, open the folder and find the primary file, Candle.exe and create a shortcut to your desktop as shown below:

Once the file has been unzipped, you can place the folder which contains Candle on your Desktop or other location on the C: drive. zip to a designated folder, and then try running the file from there.

To use, you must extract the full contents of the.

#Cnc usb controller license file serial

This is a free and open-source program that talks to your CNC by a serial USB connection and provides a variety of functions.Ĭandle can also be downloaded on its own for Windows from this link, Please note that the file linked is stored in a compressed. From there, just follow the installation process and you are done with this step. Once you have found CH340SER.exe, right-click it and select 'Run as administrator' and authorize the programs to make changes to your computer. Please note that the file linked is stored in a compressed. If you cannot find this file, you can download it again from this link.

#Cnc usb controller license file install

The first step is to install the Windows Serial port driver, labeled CH341SER. Step 1: Driver InstallationĪll files referenced should be on your SD card or mini CD, if there are any problems with accessing these you can download a full copy of this from here. We apologize for the inconvenience that this may cause, but there is not anything we can do to resolve this problem. In order to proceed with the download, you will need to select the ^ arrow and select 'Keep': Once you will do so, you can select where to save the file, but once you hit 'Ok' you will see this appear:

If you are using Google Chrome and have issues with download links, such as clicking the download link and nothing happens, you will need to right-click the download link and select 'Save Link As' in order to download.

#Cnc usb controller license file how to

How to Install Candle/GRBLControl for Windows 8 or Later